Tommy's 38 Chevy big block runner ! Here is a shot of the BBC in this 38 Chevy. We removed the Mallory distributor and installed the MSD ProBillet distributor and coil combo that woke this car up! This is a very fun car to drive! We removed the old steering column and before we install the new Flaming River polished stainless tilt column, we had a mess of wires to clean up. If you know me, then you are very familiar with how I work. There is no way that I would leave the wiring like this! I will need to re-route some things to better organize this mess. This is the fuse box after being cleaned up. These are the wires that power the electric windows. No comment necessary! This is wire loom that now carries the wires that power the electric windows. That looks better! We made a gauge panel to accept the Cyberdyne "Blue Ice™" gauges and the new Flaming River Column. The doors originally had a lever that was mounted in a very bad spot for opening the door from the inside. To resolve this problem, we installed the Rocky Hinge door handle kit and topped it off with some really nice Billet Specialties handle. Here is a look at the nice interior in the car.